Conventional Cruise Control
NOTE
• On a downhill grade , automatic braking may operate in order to maintain the set vehicle speed .
• When driving on a curve , the vehicle may not accelerate , or may decelerate , even if the set vehicle speed is higher than the current vehicle speed .
• To return to Adaptive Cruise Control use , cancel Conventional Cruise Control and then briefly press the / ( Following distance setting ) switch . A notification will sound ( 1 short beep ) when switching to Adaptive Cruise Control .
■ Increasing the set vehicle speed
●Using the RES / SET switch
• Push to the “ RES /+” side briefly . Every time the switch is pushed , the set vehicle speed will increase to the next 5 mph ( 5 km / h ) increment .
• Push to the “ RES /+” side continuously . While the switch is being pushed , the set vehicle speed will increase in increments of 1 mph ( 1 km / h ).
When operating the switch , the set vehicle speed changes on the combination meter display .
S03395
● Using the accelerator pedal 1 . Depress the accelerator pedal to increase vehicle speed .
2 . When the desired speed is reached , press the RES / SET switch to the “ SET / -” side . The speed at the time of pressing the switch will be set as the new set vehicle speed , and it appears on the EyeSight display area .
S03396
114