Replacing Bulbs 515
5. Install the light cover on the rear gate.
& Dome Light
s11be08
2. Turn the bulb until the flat surfaces at
its ends are aligned vertically.
3. Pull the bulb straight downward to
remove it.
4. Install a new bulb.
5. Reinstall the lens.
& Cargo Area Light (Outback)
s11be11
& Map Lights
s11be09
CAUTION
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
Replacing the bulb could cause
burns since the bulb may be very
hot. Have the bulb replaced by your
SUBARU dealer.
& Door Step Light
CAUTION
s11be10
Replacing the bulb could cause a
short circuit. Have the bulb replaced
by your SUBARU dealer.
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
Maintenance and Service
11
2. Pull the bulb out of the socket.
3. Install a new bulb.
– CONTINUED –