402
Driver Monitoring System
! Changing the personalization settings
s07bp0106
Item
Driver’s position personalization
Meter personalization*
Center information display
personalization*
Driver Monitoring System ON/OFF status
Seat position/outside mirror
angle
Reverse tilt-down outside mirror
angle
Combination meter display
(color LCD) basic screen
Center information display basic
Customization linked with synchronized
user function
Change the setting by using the
center information display customization
function. Refer to
“Car settings” ☞P215.
When the customization screen
linked with the synchronized
user function is selected and
the setting is changed, it is
automatically stored.
*: When the Driver Monitoring System is OFF, the Driver Monitoring System continues to store the
conditions from immediately before the Driver Monitoring System was turned OFF even if the
screen was selected and the setting was changed.
& Inattentive/Drowsy Driving
Warning
s07bp02
While driving, the Driver Monitoring System
monitors possible cases of driver
inattention or drowsiness and warns the
driver.
When the inattentive/drowsy driving warning
activates, the buzzer sounds and an
interrupt display appears.
NOTE
. The inattentive/drowsy driving warning
operates regardless of the status of
the user recognition function.
. The inattentive driving warning does
not activate when the turn signal is
operating or when the select lever is in
the “R” position.
. When the pre-collision brake system
OFF indicator is illuminated on the
combination meter display (color
LCD), the inattentive driving warning
activates at the same timing as usual
even when a vehicle ahead or obstacle
is detected. For details about the
EyeSight system, refer to the Owner’s
Manual supplement for the EyeSight
system.