Subaru Outback Manuals 2020 Outback Owner's Manual | Page 360

352 X-MODE (Outback) the Vehicle Dynamics Control system, drive very carefully based on the road surface condition. NOTE . When “Vehicle Dynamics Control” has been touched to deactivate the Vehicle Dynamics Control system, the Vehicle Dynamics Control system automatically reactivates itself the next time the ignition switch is turned to the “LOCK”/“OFF” position and the engine is restarted. . When “Vehicle Dynamics Control” has been touched to deactivate the Vehicle Dynamics Control system, the vehicle’s running performance is comparable with that of a vehicle that does not have a Vehicle Dynamics Control system. Do not deactivate the Vehicle Dynamics Control system except when absolutely necessary. . Even when the Vehicle Dynamics Control system is deactivated, components of the brake control system may still activate. When the brake control system is activated, the Vehicle Dynamics Control operation indicator light flashes. 7-14. X-MODE (Outback) WARNING . Always use the utmost care in driving – overconfidence because you are driving a vehicle with X-MODE could easily lead to a serious accident. . Always use the utmost care in driving – overconfidence because you are driving a vehicle with hill descent control function could easily lead to a serious accident. Be especially careful, and depress the brake pedal if necessary when driving on extremely steep downhill, frozen, muddy or sandy roads. Failure to control the vehicle’s speed may cause a loss of control and result in a serious accident. CAUTION . Even if your vehicle is equipped with X-MODE, winter tires should be used when driving on snowcovered or icy roads; in addition, vehicle speed should be reduced considerably. Simply having X- s07bi MODE does not guarantee that the vehicle will be able to avoid accidents in any situation. . Activate the X-MODE when you encounter a very slippery surface at low speed. However, having X- MODE is no guarantee that full vehicle control will be maintained at all times and under all conditions. When activating X-MODE, the speed of the vehicle should be reduced considerably. . Whenever suspension components, steering components, or an axle are removed from a vehicle, have the system inspected by an authorized SUBARU dealer. . Observe the following precautions in order to ensure that the X-MODE is operating properly: – All four wheels should be fitted with tires of the same size, type, and brand. Furthermore, the amount of wear should be the same for all four tires. – Keep the tire pressure at the proper level as shown on the label attached to the vehicle’s door pillar.