Automatic Climate Control Operation 279
4-3. Automatic Climate Control
Operation
s04ai
Climate control screen (dual 7.0-inch display
models)
Climate control screen (11.6-inch display
models)
1) Airflow distribution
2) Air inlet selection
3) Air conditioner compressor
4) Fan speed
When the full auto mode is selected, the
following functions are automatically controlled.
. Fan speed
. Airflow distribution
. Air inlet selection
. Air conditioner compressor operation
To activate this mode, perform the following.
1. Touch the climate control mode indicator.
2. Touch “AUTO”.
3. Set the preferred temperature. Refer to
“Temperature Control” ☞P282.
NOTE
. Operate the automatic climate control
system when the engine is running.
. Even when cooling is not necessary,
the air conditioner compressor will
automatically turn on if the temperature
is set much lower than the current
outlet air temperature. Even in this
case, the “A/C” indicator light on the
climate control screen illuminates.
. The controllable temperature range
may vary depending on the regional
specifications of the vehicle.
. If something other than temperature
control is operated while the display is
in full auto mode, the “FULL” indicator
will turn off and the “AUTO” indicator
light will remain illuminated. You can
then manually control the system as
desired using the climate control
screen. To change the system back to
full auto mode, touch “AUTO”.
To turn off the climate control system,
touch the climate control ON/OFF button.
At this time, the air inlet selection mode will
differ depending on the auto mode and
manual mode.
– CONTINUED –
4
Climate Control