Light Control Switch 243
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the key is removed from
the ignition switch.
NOTE
The light control switch can be operated
(except auto on/off headlights),
even under the following conditions.
. When the push-button ignition
switch is turned off (models with “keyless
access with push-button start
system”)
. When the key is not inserted into the
ignition switch (models without “keyless
access with push-button start
system”)
If the driver’s door is opened while the
headlights are illuminated under such
conditions, a chirp sound will inform
the driver that the lights are illuminated.
& Headlights
s03ah01
To turn on the headlights, turn the knob on
the end of the light control switch.
“ ” position:
The headlights are all off.
“ ” position:
Instrument panel illumination, headlights,
parking lights, front side marker lights, rear
side marker lights, tail lights and license
plate lights are on.
“ ” position:
Instrument panel illumination, parking
lights, front side marker lights, rear side
marker lights, tail lights and license plate
lights are on.
“ ” position: auto on/off headlights
When the ignition switch is in the “ON”
position, the instrument panel illumination,
headlights, parking lights, front side marker
lights, rear side marker lights, tail lights
and license plate lights are automatically
on or off depending on the level of the
ambient light.
The light sensitivity of the auto on/off
headlights can be changed by operating
the center information display. For details,
refer to “Car settings” ☞P215 (11.6-inch
display models) or “Vehicle setting icons”
☞P234 (dual 7.0-inch display models).
Also, the setting can be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details.
! Auto-on/off wiper-linked headlights
s03ah0106
While the light control switch is in the
“AUTO” position, the headlights will automatically
turn on when the windshield
wipers operate several times. The headlights
will automatically turn off approximately
1 minute after the wiper stops.
The ON/OFF setting of this function can be
changed by operating the center information
display. For details, refer to “Car
settings” ☞P215 (11.6-inch display models)
or “Vehicle setting icons” ☞P234 (dual
7.0-inch display models). Also, the setting
– CONTINUED –
3
Instruments and Controls