Warning and Indicator Lights 195
CAUTION
If the Auto Start Stop OFF indicator
light does not illuminate when “Auto
Start Stop” is touched, contact a
SUBARU dealer for an inspection as
soon as possible.
& Auto Start Stop Indicator
Light (Green)
s03ae66
This indicator light illuminates when the
engine has been temporarily stopped by
the Auto Start Stop system. It will turn off
when the engine is restarted.
& Auto Start Stop No
Activity Detected Indicator
Light
s03aea3
When a vehicle is stopped, the indicator
light illuminates when the operating condition
of idling stop are not meet. The light
will turn off when the vehicle starts driving.
Refer to “Non-operational conditions”
☞P365.
& X-MODE Indicator (Outback)
s03ae68
X-MODE indicator (models with 1 mode)
1) X-MODE indicator
X-MODE indicator (models with 2 modes)
1) DEEP SNOW/MUD mode indicator
2) SNOW/DIRT mode indicator
This indicator appears while the X-MODE
is activated. It will disappear when the X-
MODE is deactivated. Refer to “To Activate/Deactivate
the X-MODE” ☞P353.
& Hill Descent Control
Indicator (Outback)
s03ae69
This indicator appears while the hill descent
control function is in standby. It will
flash while the hill descent control function
is operating. It will disappear when the hill
descent control function is not available.
& BSD/RCTA Warning Indicator
(If Equipped)
s03ae80
This warning indicator appears on the
combination meter display (color LCD)
when the BSD (Blind Spot Detection) or
RCTA (Rear Cross Traffic Alert) is not
functioning for any reason. For further
details, refer to “BSD/RCTA Warning Indicator”
☞P382. If this indicator remains
displayed, have your vehicle inspected by
your SUBARU dealer as soon as possible.
& BSD/RCTA OFF Indicator
(If Equipped)
s03ae86
This indicator appears on the combination
meter display (color LCD) when “BSD/
RCTA” is touched to deactivate the BSD
(Blind Spot Detection) and RCTA (Rear
– CONTINUED –
3
Instruments and Controls