Subaru Outback Manuals 2020 Outback Owner's Manual | Page 201

Warning and Indicator Lights 193 & SI-DRIVE Indicator Light (If Equipped) s03ae52 SI-DRIVE indicator light 1) Intelligent (I) mode 2) Sport Sharp (S#) mode This light indicates the current SI-DRIVE mode. For details of SI-DRIVE mode, refer to “SI- DRIVE” ☞P344. & Select Lever/Gear Position Indicator s03ae43 1) Upshift indicator 2) Downshift indicator 3) Select lever/gear position indicator The select lever position is displayed on the indicator. ! Upshift/downshift indicator s03ae4305 When the manual mode is selected, the gear position indicator (which shows the current gear selection) and the available upshift/downshift indicator light up. Refer to “Selection of Manual Mode” ☞P342. & Turn Signal Indicator Lights s03ae20 These lights show the operation of the turn signal or lane change signal. If the indicator lights do not blink or blink rapidly, the turn signal bulb may be burned out. Replace the bulb as soon as possible. Refer to “Replacing Bulbs” ☞P510. & High Beam Indicator Light s03ae21 This light shows that the headlights are in the high beam mode. This indicator light also illuminates when operating the headlight flasher. & High Beam Assist Indicator s03ae83 This indicator appears when the high beam assist function is activated. For details about the high beam assist function, refer to “High Beam Assist Function” ☞P245. 3 Instruments and Controls – CONTINUED –