Subaru Outback Manuals 2020 Outback Owner's Manual | Page 198

190 Warning and Indicator Lights Inside warning chime Outside warning chime Operation indicator on push-button ignition switch Ding — — Ding Ding Long beep (continuous) Long beep (continuous) Beep, beep, beep (3 times) Beep, beep, beep (3 times) Long beep (continuous) — — — — — Status Access key warning for engine start: The push-button ignition switch is pressed while the access key fob is not inside the vehicle. Access key takeout warning: The driver exits the vehicle with the access key fob and closes the driver’s door while the push-button ignition switch is in a position other than “OFF” and the select lever is in the “P” position. Passenger access key takeout warning: A fellow passenger exits the vehicle with the access key fob and closes a door other than the driver’s door while the push-button ignition switch is in a position other than “OFF”. Access key takeout without “P” position warning: The driver exits the vehicle with the access key fob and closes the driver’s door while the push-button ignition switch is in a position other than “OFF” and the select lever is in a position other than the “P” position. Select lever position warning: . Case 1: The engine is turned off by pressing the push-button ignition switch while the select lever is in a position other than the “P” position. . Case 2: The driver’s door is opened while the push-button ignition switch is in a position other than “OFF” and the select lever is in a position other than the “P” position. Action Carry the access key fob, and press the push-button ignition switch. Switch the push-button ignition switch to “OFF”, and get out of the vehicle. Return the access key fob to inside the vehicle, or switch the push-button ignition switch to “OFF”. Shift the select lever to the “P” position, switch the push-button ignition switch to “OFF” and exit the vehicle. . Case 1: Start the engine, shift the select lever to the “P” position, switch the pushbutton ignition switch to “OFF” and exit the vehicle. . Case 2: Shift the select lever to the “P” position, switch the push-button ignition switch to “OFF” and exit the vehicle.