Ignition Switch (Models without Push-Button Start System) 167
NOTE
. To turn the key from the “ACC” to
“LOCK” position, the select lever must
be in the “P” position and the key must
be pushed in and turned.
. If your registered key fails to start
the engine, pull out the key once (the
security indicator light will blink), and
then insert the key again and turn it to
the “START” position again to restart
the engine.
. The engine may not start in the
following cases:
– The key grip is touching another
key or a metallic key holder.
– The key is near another key that
contains an immobilizer transponder.
– The key is near or touching
another transmitter.
& Key Reminder Chime
s03aa05
The reminder chime sounds when the
driver’s door is opened and the ignition
switch is in the “LOCK” or “ACC” position.
The chime stops under the following
conditions.
. When the ignition switch is turned to the
“ON” position.
. When the key is removed from the
ignition switch.
. When the driver’s door is closed.
& Ignition Switch Light
s03aa06
For easy access to the ignition switch in
the dark, the ignition switch light illuminates
when driver’s door is opened or
when the driver’s door is unlocked using
the remote keyless entry transmitter.
The light remains illuminated for approximately
30 seconds and gradually turns off
under the following conditions.
. When the driver’s door is closed
. When the doors are unlocked using the
remote keyless entry transmitter
– CONTINUED –
3
Instruments and Controls