Keys 113
2-1. Keys
s02aa
NOTE
For models with “keyless access with
push-button start system”, refer to
“Keyless Access with Push-Button
Start System” ☞P113.
1) Master key
2) Valet key
3) Key number plate
Two types of keys are provided for your
vehicle:
Master key and valet key.
The master key fit all locks on your vehicle.
. Ignition switch
. Driver’s door
. Glove box
The valet key fits only the ignition switch
and door locks. You can keep the glove
box locked when you leave your vehicle
and valet key at a parking facility.
NOTE
Locking/unlocking using the remote
keyless entry system can also be controlled
with the buttons on the key. For
detailed information, refer to “Remote
Keyless Entry System” ☞P132.
CAUTION
Do not attach a large key holder or
key case to either key. If it bangs
against your knees while you are
driving, it could turn the ignition
switch from the “ON” position to
the “ACC” or “LOCK” position,
thereby stopping the engine.
& Key Number Plate
s02aa01
The key number is stamped on the key
number plate attached to the key set. Write
down the key number and keep it in
another safe place, not in the vehicle. This
number is needed to make a replacement
key if you lose your key or lock it inside the
vehicle. Refer to “Key Replacement”
☞P130.
2-2. Keyless Access with
Push-Button Start System
(If Equipped)
s02ap
The following access key fobs are provided
with the vehicle.
1) Access key fob
2) Key number plate
The keyless access with push-button start
system allows you to perform the following
functions when you are carrying the
access key fob.
. Locking and unlocking of the doors, fuel
filler lid and rear gate (Outback)
. Opening the trunk (Legacy)
. Starting and stopping the engine. For
detailed information, refer to “Starting and
Stopping Engine (Models with Push-But-
– CONTINUED –
2
Keys and Doors