1-6
Seat, seatbelt and SRS airbags/Front seats
! Memory function (driver’s seat — if
equipped)
S01AA0207
WARNING
. To avoid loss of vehicle control or
personal injury, never perform
the following operations while
driving.
– Adjusting the seat
– Retrieving the seat position
. Before adjusting the seat, make
sure that cargo or the hands and
feet of rear seat passengers are
clear of the adjusting mechan-
ism.
. Perform the seat position retrie-
val before driving. Be sure to
confirm that the select lever is in
the “P” position, and the parking
brake is applied, when adjusting
the seat position. Do not drive
until the retrieval of the seat
position is complete.
. When retrieving a registered seat
position, make sure the hands,
feet and possessions of rear seat
passengers are clear of the seat
adjusting mechanism.
. When any unusual conditions or
malfunctions occur during the
retrieval of the seat position, stop
the retrieval of the seat position
by performing any of the follow-
ing procedures.
– Operate any of the power seat
switches
– Press the “SET” button
– Press button “1” or “2”
Some of your desired seat positions can
be registered. Register the seat position
with button “1” or “2” or each of the key fobs
and retrieve the seat position.
The following seat positions can be regis-
tered.
. Forward/backward position of the seat
. Angle of seatback
. Angle of seat cushion
. Height of seat
! Registration of seat position with
button “1” or “2”
S01AA020701
1. Adjust the seat position under the
following conditions.
. The parking brake is applied.
. The select lever is in the “P” position.
2. While pressing the “SET” button, press
and hold the desired button “1” or “2”.
A chirp sounds once, and the seat position
is registered.
! Registration of seat position with
each key fob
S01AA020703
1. Adjust the seat position under the
following conditions.
. The parking brake is applied.
. The ignition switch is in the “LOCK”/
“OFF” position.
. The select lever is in the “P” position.