Driving tips/Loading your vehicle
3. Install the bars into the holders.
4. Make sure that the latches are fitted
securely.
2. Remove the cap of the roof rail holder
by using the torque wrench.
8-17
4. Pull out the crossbar from the roof rail
holder by pulling up the cover.
5. Install the crossbar into the other
holder.
! How to change the position of the
crossbar
S08AJ080201
WARNING
Carefully read the warning label
attached to the roof rail.
You can change the position of the rear
crossbar. To change the position, perform
the following procedure.
1. Take out the torque wrench from the
under-floor storage compartment.
3. Remove the bolt of the crossbar by
using the torque wrench.
6. Tighten the bolt of the crossbar by
using the torque wrench. The tightening
– CONTINUED –