Starting and operating/Cruise control
maintain the previous cruising speed.
& To temporarily cancel the
cruise control
S07AQ02
The cruise control can be temporarily
canceled in the following ways.
accident.
7-47
& To turn off the cruise control
S07AQ03
The cruise control set indicator in the
combination meter disappears when the
cruise control is canceled.
There are two ways to turn off the cruise
control:
. Press the cruise control main button
again.
. Turn the ignition switch to the “ACC” or
“LOCK”/“OFF” position (but only when the
vehicle is completely stopped).
& To change the cruising speed
S07AQ04
! To increase the speed (by the “RES/
SET” switch)
S07AQ0405
. Press the “CANCEL” button.
. Press the X-mode switch to activate the
X-mode (models with X-mode).
. Depress the brake pedal.
WARNING
Do not place the select lever in the
“N” position while driving. If the
select lever is shifted into the “N”
position, cruise control can be can-
celed but the engine brake will no
longer work. This could result in an
To resume the cruise control after it has
been temporarily canceled and with vehi-
cle speed of approximately 20 mph (30
km/h) or more, press the “RES/SET”
switch to the “RES” side to return to the
original cruising speed automatically.
The cruise control set indicator in the
combination meter will automatically ap-
pear at this time.
Press the “RES/SET” switch to the “RES”
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated as the new
set speed.
– CONTINUED –