Subaru Outback Manuals 2018 Outback Owner's Manual | Page 324

7-44 Starting and operating/Parking your vehicle . When carrying a heavy load . When you do not frequently use the parking brake when stopping on an uphill slope ! Hill Holder indicator light S07AP030202 NOTE . If the Hill Holder switch is pressed for more than 30 seconds, the Hill Holder indicator light turns off and the system ignores any further pressing of the switch. To activate the switch again, turn the ignition switch to the “LOCK”/ “OFF” position and restart the engine. . When the Hill Holder function is deactivated while the Hill Holder func- tion has a malfunction, if you press the Hill Holder switch, a chirp sounds. When the Hill Holder function is activated, the Hill Holder indicator light illuminates. Refer to “Hill Holder indicator light” F3-22. ! Emergency brake S07AP0303 CAUTION Use the emergency brake only in case of an emergency. If the emer- gency brake is excessively used, the brake parts will wear down faster or the brake may not work sufficiently due to brake overheating. NOTE . While using the emergency brake, the electronic parking brake indicator light and the indicator light on the parking brake switch illuminate and a chirp sounds. . While using the emergency brake, a sound may be heard from the engine compartment. This is the operating sound of the brake that is activated by the Vehicle Dynamics Control system, and does not indicate a malfunction. If the foot brake has a malfunction, you can stop the vehicle by pulling the parking brake switch continuously. While applying the emergency brake, the electronic parking brake indicator light and the indicator light on the parking brake switch illuminate and a chirp sounds. ! Electronic parking brake system warning S07AP0304 CAUTION If the brake system warning light turns on, the electronic parking brake system may be malfunction- ing. Immediately stop your vehicle in the nearest safe location and con- tact your SUBARU dealer.