Instruments and controls/Mirrors
Mirrors
S03AP
Always check that the inside and outside
mirrors are properly adjusted before you
start driving.
& Auto-dimming mirror/com-
pass with HomeLink ® (U.S.-
spec. models without
EyeSight system - if
equipped)
S03AP09
& Inside mirror (without auto-
dimming function) (if
equipped)
S03AP08
1)
2)
Normal position
Anti-glare position
Push the tab on the mirror for normal use.
To reduce glare from the headlights of the
vehicle behind you, pull the tab to the anti-
glare position.
1)
2)
3)
4)
5)
6)
7)
8)
HomeLink ® button 1
HomeLink ® button 2
LED
HomeLink ® button 3
Sensor
Automatic dimming on/off button
Compass display button
Compass display
3-67
. By pressing the automatic dimming on/
off button, the automatic dimming function
is toggled on or off. When the automatic
dimming function is on, the LED indicator
will illuminate.
Even with the mirror in the automatic
dimming mode, the mirror surface turns
bright if the transmission is shifted into
reverse. This is to ensure good rearward
visibility during reversing.
. By pressing the compass display but-
ton, the compass display is toggled on or
off. When the compass is on, an illumi-
nated compass reading will appear in the
upper right corner of the mirror.
When cleaning the mirror, use a paper
towel or similar material dampened with
glass cleaner. Do not spray glass cleaner
directly on the mirror as that may cause the
liquid cleaner to enter the mirror housing
and damage the mirror.
The auto-dimming mirror has an anti-glare
feature which automatically reduces glare
coming from headlights of vehicles behind
you. It also contains a built-in compass and
HomeLink ® wireless control system.
– CONTINUED –