Instruments and controls/Front fog light switch
Front fog light switch
(if equipped)
3-61
Wiper and washer
S03AM
S03AL
WARNING
In freezing weather, do not use the
windshield washer until the wind-
shield is sufficiently warmed by the
defroster.
Otherwise the washer fluid can
freeze on the windshield, blocking
your view.
Indicator light
1)
2)
Headlight switch
Fog light switch
To turn on the front fog lights:
Turn the fog light switch to the “ ” position
while the headlights are in either of the
following conditions.
. while the headlight switch is in the “ ”
position with the low beam mode selected
. while the headlight switch is in the
“AUTO” position and the low beam head-
lights turn on automatically
To turn off the front fog lights:
Turn the fog light switch back down to the
“ ” position.
The indicator light located on the combina-
tion meter will illuminate when the front fog
lights are on.
CAUTION
. Do not operate the washer con-
tinuously for more than 10 sec-
onds, or when the washer fluid
tank is empty. This may cause
overheating of the washer motor.
Check the washer fluid level fre-
quently, such as at fuel stops.
. Do not operate the wipers when
the windshield or rear window is
dry. This may scratch the glass,
damage the blade rubbers and
might cause the wiper motor to
fail. Before operating the wiper
on a dry windshield or rear win-
dow, always use the windshield
washer.
– CONTINUED –