3-48
Instruments and controls/Multi information display
! Vehicle Setting
S03BK0708
After entering the “Vehicle Setting” menu,
select one of the following menus.
! Keyless Entry System
S03BK070801
After entering the “Keyless Entry System”
menu, select one of the following menus.
. Audible Signal (models with “key-
less access with push-button start
system”):
The audible signal can be activated or
deactivated. Select “On” to activate. Select
“Off” to deactivate.
. Hazard Warning Flasher:
The hazard warning flasher operation can
be activated or deactivated. Select “On” to
activate. Select “Off” to deactivate.
. Driver Door Unlock (models with
“keyless access with push-button start
system”):
The door unlock selection function is
available for the “keyless access” entry
function. For details, refer to “Door unlock
selection function” F2-18. On this setting
menu, the door unlock selection function
for the driver’s door can be customized.
Select “Driver Door Only” to set as
“Operational”. Select “All” to set as “Non-
operational”.
. Rear Gate Unlock (Outback with
“keyless access with push-button start
system”):
The door unlock selection function is
available for the “keyless access” entry
function. For details, refer to “Door unlock
selection function” F2-18. On this setting
menu, the door unlock selection function
for the rear gate can be customized. Select
“Rear Gate/Trunk Only” to set as “Opera-
tional”. Select “All” to set as “Non-opera-
tional”.
! Defogger
S03BK070802
The defogger and deicer system can be
set for the continuous operation mode or
automatic shut-off mode. Select “Contin-
uous” to select the continuous operation
mode. Select “15 minutes” to select the
automatic shut-off mode.
! Interior Light
S03BK070803
The setting for the period of time in which
the interior lights remain on (OFF delay
timer) after closing the doors and/or the
rear gate can be set or customized. Select
the preferred seconds to customize the
operation period. Select “Off” to deactivate
the OFF delay timer.
! Auto Door Lock and Unlock
S03BK070808
Setting conditions for Auto Door Lock and
Unlock
. Auto Door Lock:
Set the condition of the following items to
lock the door automatically.
– Vehicle Speed: When the vehicle
speed reaches more than 12 mph (20
km/h).
– Shift Into or Out of PARK: When the
select lever is shifted into a position
other than the “P” position.
– Off: When the function is set to OFF.
. Auto Door Unlock:
Set the conditions of the following items to
unlock the door automatically.
– Shift Into or Out of PARK: When the
select lever is shifted into the “P”
position.
– Ignition OFF: When the ignition
switch is turned to OFF.
– Driver Door Open: When the dri-
ver’s door is open.
– Off: When the function is set to OFF.