Subaru Outback Manuals 2018 Outback Owner's Manual | Page 195

Instruments and controls/Multi information display as vehicle information, warning informa- tion, etc., they will interrupt the current screen, and appear on the display accom- panied by a beep. If such a screen is displayed, take proper action according to the message shown on the screen. The warning screen will return to the original screen after a few seconds. While the “ ” information reminder is shown on the display, it may be possible to display the warning screen again. To recall the message marked with “ ” on the display, pull the “ /SET” switch on the steering wheel toward you. & Welcome screen and Good- bye screen S03BK08 When the driver’s door is opened and closed after unlocking the door, the wel- come screen will appear on the multi information display for approximately 20 seconds. When the ignition switch is turned to the “LOCK”/“OFF” position, the multi informa- tion display gradually turns off (Good-bye screen). screen is displayed. . Once the welcome screen appears, it takes a certain period of time to display it again. . If the ignition switch is operated after unlocking the driver’s door, the welcome screen will not appear even when the driver’s door is opened and closed. . The welcome screen will disappear when you lock the driver’s door by using the remote keyless entry system (all models) or the keyless access function (if equipped) while the wel- come screen is displayed. . If any of the doors (including the rear gate) is opened while the welcome screen is displayed, the door ajar warning will appear. . The welcome screen can be set to on or off. For details, refer to “Welcome Screen” F3-47. . The Good-bye screen can be set to on or off. For details, refer to “Good-bye Screen” F3-47. 3-39 & Warning screen S03BK05 Example of warning If there is a warning message or a maintenance notification, it will appear for approximately 5 seconds. Take the appro- priate actions based on the messages indicated. NOTE . The basic screen will be shown when the ignition switch is turned to the “ON” position while the welcome – CONTINUED –