Bluetooth ® SETTINGS
4.
Check that “Connected” is displayed next to the
Bluetooth phone/device when the connection is
complete.
● ● If an error message appears, follow the guidance on
the screen to try again.
NOTE
AUTO CONNECTION MODE
Leave the Bluetooth phone/device in a location where the
connection can be established.
● ● When the ignition switch is in the “ACC” or “ON”
position, the system searches for a nearby registered
Bluetooth phone/device.
● ● The system will connect with the registered Bluetooth
phone/device that was last connected, if it is nearby.
When the auto connection has failed, it is necessary to
connect Bluetooth phones/devices manually.
1.
2.
3.
Select
, and then select Settings (Settings).
Select Phone (Phone).
Follow
the
steps
in
“CONNECTING
OR
DISCONNECTING Bluetooth PHONE/DEVICE” from
“STEP 2”. (→P.60)
RECONNECTING THE Bluetooth PHONE/DEVICE
If a Bluetooth phone/device is disconnected due to poor
reception from the Bluetooth network when the ignition
switch is turned to the “ACC” or “ON” position, the system
automatically reconnect t