Conventional Cruise Control
● Automatic cancellation by the system
In the following cases, a buzzer sounds 1 short beep and 1 long beep and the Cruise control
function is automatically canceled (
is displayed on the EyeSight display area.). After
the conditions listed below have been resolved, perform the cruise control set operation
again to reactivate cruise control.
• The select lever was moved to a position other than D .
The cruise control function can be used again after the lever is returned to the D posi-
tion.
• A paddle shift switch was operated during driving with the lever in the D position.
The cruise control function can be used again after the shift indicator returns to D .
• Vehicle speed drops to approximately 20
MPH (30 km/h) or less (due to a steep uphill
grade or some other reason).
OFF
indicator
S02849
• The X-MODE is turned on (the X-MODE indicator light
illuminates).
- Cruise control can be resumed after the X-MODE is turned off.
• Vehicle speed increases to approximately 100 MPH (160 km/h) or more.
• The Vehicle Dynamics Control or the Traction Control Function is activated.
• Any door (except the rear gate/trunk) was opened.
• The driver’s seatbelt is unfastened.
• The Electronic Parking Brake is engaged.
• EyeSight is malfunctioning. (Refer to page 89, “EyeSight malfunction and temporary
stop”.)
• The steering wheel is turned significantly in either direction.
• The grade of the road is steep.
• The Pre-Collision secondary braking has activated.
WARNING
Do not use Conventional Cruise Control on slippery roads. Doing so may
result in an accident.
85