Conventional Cruise Control
(2) Switch to Conventional Cruise Control.
Press and hold the
or
side of the following distance setting switch for approx-
imately 2 seconds or longer to switch from Adaptive Cruise Control to Conventional
Cruise Control. A buzzer sounds 1 short beep.
At this time, the following distance setting indicator on the EyeSight display area of the
combination meter display turns off and
(Conventional Cruise Control) is displayed.
S02657
S01129
To set the ready status:
Conventional Cruise Control can be set when
all of the following conditions are met and
is displayed on the EyeSight display
area.
- All doors (except the rear gate/trunk) are
closed.
- The driver’s seatbelt is fastened.
- The electronic parking brake is not
READY
engaged (The brake system warning light
indicator
is turned off.).
- The select lever is in the D position, and
S02798
the paddle shift is not operated.
- The brake pedal is not depressed.
- The road is not on a steep slope.
- The steering wheel has not been turned significantly in either direction.
- The X-MODE is not turned on.
- The vehicle speed is between approximately 20 MPH (30 km/h) and 90 MPH (145
km/h).
(3) Control the accelerator pedal to reach the desired speed.
80