Subaru Outback Manuals 2018 Outback EyeSight Driving Assist System Manual | Page 76

Lane Departure Warning CAUTION In the following situations, the Lane Departure Warning may not activate: • Vehicle speed is approximately 30 MPH (50 km/h) or less. • When the steering wheel is turned significantly to either side • When the vehicle is driving around a curve whose radius is 0.18 miles (300 m) or smaller. • When the brake pedal is depressed or immediately after it is depressed • When the following distance behind a vehicle in front is short • While the turn signal is operating and for approximately 4 seconds after the turn signal lever has returned to its original position • When the vehicle has not returned to the inside of the lane after the Lane Departure Warning has activated • The lane is narrow. • When it is difficult for the camera to detect lane markings - There are no lane markings or they are very worn. - The lane markings are yellow. - It is difficult to detect lane markings as they are similar in color to the road surface. - The lane markings are narrow. NOTE • The following situations may cause incorrect lane detection and a faulty Lane Departure Warning to occur. - When there are tire tracks on a wet road or snow-covered road - When there are boundaries between snow and asphalt, or marks from road repair, etc. - When there are the shadows of guardrails - When lane markings are drawn in double - When there are some lane markings left from roadwork or markings from the previous road. • When the Lane Departure Warning OFF indicator light is illuminated, the Lane Departure Warning is inactive. Ÿ Refer to page 73. 72