Subaru Outback Manuals 2018 Outback EyeSight Driving Assist System Manual | Page 46

Adaptive Cruise Control When a vehicle in front is detected, a buzzer sounds 1 short beep and the lead vehicle indicator will illuminate. (white) will turn green. The vehicle follows the lead vehicle in front and maintains the selected following distance. At this time, the cruise speed is adjusted to and will not exceed the set speed. If the vehicle in front is no longer detected, a buzzer sounds 1 short beep and the lead vehicle indicator turns off. (green) will turn white. Lead vehicle indicator S02703 NOTE The buzzer sound (lead vehicle acquisition sound) that occurs when a vehicle in front is detected or no longer detected while Adaptive Cruise Control is set can be turned off by customization. Ÿ Refer to page 92. Operation of Adaptive Cruise Control • When no vehicle in front is detected The vehicle drives constantly and corre- spondingly to the set vehicle speed between 20 MPH (30 km/h) and 90 MPH (145 km/h). • When a vehicle in front is detected The vehicle follows the lead vehicle in front, and will maintain the chosen following dis- tance (there are four settings), up to the set target vehicle speed - between 20 MPH (30 km/h) and 90 MPH (145 km/h). S01979 S01980 42