Subaru Outback Manuals 2018 Outback EyeSight Driving Assist System Manual | Page 35

Pre-Collision Braking System Turning off the Pre-Collision Braking System Press and hold the Pre-Collision Braking System OFF switch for approximately 2 seconds (or longer) to turn off the Pre-Collision Braking System (including Pre-Collision Brake Assist). When 1 short beep sound emits, this control is turned off and the Pre-Collision Braking System OFF indicator light on the instrument panel illuminates. To turn the control back on, press and hold the Pre-Collision Braking System OFF switch for approximately 2 seconds or longer again. When this control is turned on, the Pre-Collision Braking System OFF indicator light turns off. S01120 NOTE • When the Pre-Collision Braking System is turned off, Throttle Management Control function is also turned off. • Even when the Pre-Collision Braking System is turned switch is turned off and the engine is then restarted, Braking System will be turned on. The system default vehicle is restarted in “ON”. the Pre-Collision off, if the ignition the Pre-Collision setting when the 31