Start/Stop engine
Push-button ignition switch (if equipped)
To start engine:
STEP1: Carry the access key, and sit in the driver’s seat.
STEP2: Apply the parking brake.
STEP3: Shift the select lever in the P position.
STEP4: Depress the brake pedal until the indicator on
the push-button ignition switch turns green.
STEP5: While depressing the brake pedal, press the
push-button ignition switch.
Operation
indicator
To stop engine:
STEP1: Stop the vehicle completely.
STEP2: Move the select lever to the P position.
STEP3: Press the push-button ignition switch.
Change of the power supply (Without starting engine)
Every time the button is pressed without depressing the brake pedal, the power is switched
in the sequence of OFF➞ACC➞ON➞OFF.
OFF (Turned off)
ACC (Orange)
Electronic parking brake switch
ON (Orange)
Ignition switch (if equipped)
Release
Apply
*The design may be slightly different from the illustration
depending on the models.
The key can be turned from ACC to LOCK
only when the key is pushed in while turning
it (all models) and the select lever is in the P
position (CVT models).
4
◆ Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.