Seat, seatbelt and SRS airbags/*SRS airbag (Supplemental Restraint System airbag)
anchorage.
5. Tighten the top tether securely.
*SRS airbag (Supplemental
Restraint System airbag)
! Outback
*SRS: This stands for Supplemental Restraint System. This name is used because the airbag system supplements the
vehicle’s seatbelts.
4. Attach the top tether hook to the
appropriate upper anchorage.
5. Tighten the top tether securely.
1)
2)
When installing on the window-side
seating position
When installing on the rear center seating position
1. Raise the head restraint at the seating
position where the child restraint system is
to be installed with the seatbelt or lower
anchorages.
2. Adjust the seatback to the upright
position.
3. Pass the top tether between the head
restraint and seatback.
1-41
Your vehicle is equipped with a supplemental restraint system in addition to a
lap/shoulder belt at each front seating
position and each rear window-side seating position. The supplemental restraint
system (SRS) consists of the following
airbags.
. Driver’s and front passenger’s frontal
airbags
. Driver’s and front passenger’s side
airbags
. Driver’s and front passenger’s seat
cushion airbags
. Curtain airbags (for driver, front passenger, and window-side rear passengers)
These SRS airbags are designed only
to be a supplement to the primary
protection provided by the seatbelt.
The system also controls front seatbelt
pretensioners. For operation instructions
and precautions concerning the seatbelt
– CONTINUED –