Subaru Outback Manuals 2017 Outback Owner's Manual | Page 545

11-42 Maintenance and service/Replacing bulbs surface. 4. To install the bulb to the headlight assembly, turn it clockwise until it clicks. 5. Reconnect the electrical connector. & Front side marker light & Front turn signal light Low beam headlight (if equipped) 1. Turn the socket counterclockwise and pull it out. 2. Pull out the bulb from the socket and replace the bulb with a new one. 1. Turn the socket counterclockwise and pull it out. 2. Pull out the bulb from the socket and replace the bulb with a new one. High beam headlight 2. Remove the bulb from the headlight assembly by turning it counterclockwise. 3. Replace the bulb with new one. At this time, use care not to touch the bulb & Front fog light (if equipped) NOTE It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary.