Driving tips/Loading your vehicle
1. Pull out the integrated crossbars from
the roof rail holders by pulling up the
covers.
3. Install the bars into the holders.
4. Make sure that the latches are fitted
securely.
8-17
2. Remove the cap of the roof rail holder
by using the torque wrench.
! How to change the position of the
crossbar
WARNING
Carefully read the warning label
attached to the roof rail.
2. Slide the bars in the direction shown in
the illustration.
You can change the position of the rear
crossbar. To change the position, perform
the following procedure.
1. Take out the torque wrench from the
under-floor storage compartment.
3. Remove the bolt of the crossbar by
using the torque wrench.
– CONTINUED –