Audio / Bluetooth ® settings
5-67
“ BT Devices Connection ” screen ( At the initial startup and when no device is registered ).
5 . Touch the “ Add ” key .
When the “ Add ” key is selected ( Waiting for the connection request from a device ).
. For details about operating the Bluetooth device , see the manual that comes with it . . To cancel the registration , touch the “ Cancel ” key .
6 . Register the Bluetooth device using your Bluetooth device . . A PIN-code is not required for SSP ( Secure Simple Pairing ) compatible Bluetooth devices . Depending on the type of Bluetooth device being connected , a message confirming registration may be displayed on the Bluetooth device ’ s screen . Respond and operate the Bluetooth device according to the confirmation message .
7 . Check that the screen is displayed when registration is complete . . The system waits for connection requests coming from the registered device . . At this stage , the Bluetooth functions are not yet available .
! Registering a Bluetooth Audio device for the first time
To use the Bluetooth Audio , it is necessary to register an audio device with the system .
The device registration procedure is the same for both the hands-free system and
Bluetooth audio .
1 . Display the “ BT Devices Connection ” screen . Refer to “ Registering a Bluetooth phone for the first time ” F5-66 .
2 . Select the “ Add ” key .
The “ Add ” key is not displayed when five devices are already registered .
To add another device , you need to delete one of the registered devices .
Press the key for the device to be deleted , and then select the “ OK ” key .
3 . Register the Bluetooth device using your Bluetooth device . . A PIN-code is not required for SSP ( Secure Simple Pairing ) compatible Bluetooth devices . Depending on the type of Bluetooth device being connected , a message confirming registration may be displayed on the Bluetooth device ’ s screen . Respond and operate the Bluetooth device according to the confirmation message .
4 . Check that the screen is displayed when registration is complete . . The system waits for connection requests coming from the registered device . . At this stage , the Bluetooth functions are not yet available .
– CONTINUED –