Climate control/Manual climate control
& Temperature control
the instrument panel and some through
windshield defroster outlets (A small
amount of air flows to the windshield and
both side windows to prevent fogging.)
Turn the temperature control dial over a
range from the blue side (cool) to red side
(warm) to regulate the temperature of
airflow from the air outlets.
A)
Models with rear ventilators
(Defrost): Windshield defroster outlets and
both side outlets of the instrument panel
A)
Models with rear ventilators
(Heat-def): Windshield defroster outlets,
foot outlets and both side outlets of the
instrument panel
4-7
NOTE
. When the “ ” mode or “ ” mode
is selected, the air conditioner compressor automatically operates to more
quickly defog the windshield. At the
same time, the air inlet selection is
automatically set to the outside air
mode.
In this state:
– The air conditioner indicator light
does not illuminate.
– You cannot stop the air conditioner compressor by pressing the
air conditioner button.
! MAX A/C mode
Perform the following operation to select
the MAX A/C mode.
. Turn the temperature control dial to the
“MAX A/C” position (models with type A
climate control system).
. Press the “MAX A/C” button (models
with type B climate control system).
When this mode is selected, some of the
settings will be changed as follows.
Type A climate control system:
. The air inlet selection mode will be
changed to the ON position (recirculation).
. The air conditioner will turn on.
Type B climate control system:
. The temperature setting will be changed to the maximum cooling mode.
. The fan speed setting will be changed
to the maximum speed.
. The airflow mode setting will be changed to the “
” (ventilation) mode.
. The air inlet selection mode will be
changed to the ON position (recirculation).
– CONTINUED –