Subaru Outback Manuals 2017 Outback Owner's Manual | Page 224

Instruments and controls/Mirrors & Auto-dimming mirror with HomeLink® (except U.S.spec. models - if equipped) 1) 2) 3) ! In case a problem occurs If you cannot activate a device using the corresponding HomeLink® button after programming, contact HomeLink® at www.homelink.com or call 1-800-3553515 for assistance. dimming function is on, the LED indicator will illuminate. Even with the mirror in the automatic dimming mode, the mirror surface turns bright if the shift lever/select lever is shifted into the “R” (reverse) position. This is to ensure good rearward visibility during reversing. When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner to enter the mirror housing and damage the mirror. HomeLink® button 1 HomeLink® button 2 HomeLink® button 3 1. Press and hold the two outer buttons (button 1 and button 3) until the indicator light begins to flash (after approximat