Subaru Outback Manuals 2017 Outback Owner's Manual | Page 211

3-56 Instruments and controls/Front fog light switch Front fog light switch (if equipped) Indicator light 1) 2) Headlight switch Fog light switch To turn on the front fog lights: Turn the fog light switch to the “ ” position while the headlights are in either of the following conditions. . while the headlight switch is in the “ ” position with the low beam mode selected . while the headlight switch is in the “AUTO” position and the low beam headlights turn on automatically To turn off the front fog lights: Turn the fog light switch back down to the “ ” position. The indicator light located on the combination meter will illuminate when the front fog lights are on. & Steering responsive fog lights system (models with EyeSight system) The steering responsive fog lights system automatically turns the front fog light on and off based on the steering angle and vehicle speed when entering a curve or driving on curved roads. The system is intended to help prevent accidents by enabling better visibility of curves ahead and early recognition of any disabled vehicles or other obstacles. The front fog light on the inside of a curve will turn on if all of the following conditions are met. . The low beam headlights are on . The fog light switch is in the “ ” position . The low beam mode is selected (the turn signal lever is in the center position) . The select lever is in the “D” position or the manual mode is selected . The steering response fog lights system has not been deactivated . The operating conditions such as the steering angle and vehicle speed are met The front fog lights on both sides will turn on as usual if all of the following conditions are met. . The low beam headlights are on . The fog light switch is in the “ ” position . The low beam mode is selected (the turn signal lever is in the center position)