3-32
Instruments and controls/Warning and indicator lights
& Cruise control set in-
& Front fog light indicator
This indicator appears when vehicle
speed has been set to use the cruise
control function.
This indicator light illuminates while the
front fog lights are illuminated.
dicator
& Automatic headlight
beam leveler warning
light (models with HID
headlights)
This light illuminates when the automatic
headlight beam leveler does not operate
normally.
If this light illuminates while driving or does
not turn off approximately 3 seconds after
turning the ignition switch to the “ON”
position, have your vehicle inspected at
your SUBARU dealer.
& Headlight indicator
light
This indicator light illuminates under the
following conditions.
. when the light switch is turned to the
“
” or “ ” position
. when the light switch is in the “AUTO”
position and the headlights illuminate
automatically
light (if equipped)
& X-mode indicator (if
equipped)
This indicator appears while the X-mode is
activated. It will disappear when the Xmode is deactivated.
& Hill descent control
indicator (if equipped)
This indicator appears while the hill
descent control function is in standby. It
will flash while the hill descent control
function is operating. It will disappear
when the hill descent control function is
not available.
& Steering responsive
fog lights OFF indicator
(models with EyeSight
system)
This indicator appears when the steering
responsive fog lights system is deactivated. This indicator disappears when the
system is activated.
For details about the steering responsive
fog lights system, refer to “Steering
responsive fog lights system (models with
EyeSight system)” F3-56.
& BSD/RCTA warning indicator (if equipped)
This warning indicator appears on the
multi information display when the BSD
(Blind Spot Detection) or RCTA (Rear
Cross Traffic Alert) is not functioning for
any reason. For further details, refer to
“BSD/RCTA warning indicator” F7-59. If
this indicator remains displayed, have
your vehicle inspected by your SUBARU
dealer as soon as possible.
& BSD/RCTA OFF indicator (if equipped)
This indicator appears on the multi information display when the BSD/RCTA
OFF switch is pressed to deactivate the
BSD (Blind Spot Detection) and RCTA
(Rear Cross Traffic Alert). For details, refer
to “BSD/RCTA OFF switch” F7-60.
& Icy road surface warning indicator
When the outside temperature is 378F
(38C) or less, the icy road surface warning
indicator will illuminate to inform the driver
that the road surface may be frozen.