3-12
Instruments and controls/Meters and gauges
& Temperature gauge
CAUTION
If the pointer exceeds the normal
operating range, safely stop the
vehicle as soon as possible.
Refer to “Engine overheating” F913.
efficiency as shown in the following chart.
Displayed unit
Needle position
“+” side
“-” side
MPG
Better
Poorer
l/100km
Poorer
Better
NOTE
& ECO gauge
1)
Normal operating range
The temperature gauge shows engine
coolant temperature when the ignition
switch is in the “ON” position.
The coolant temperature will vary in
accordance with the outside temperature
and driving conditions.
We recommend that you drive moderately
until the pointer of the temperature gauge
reaches near the middle of the range.
Engine operation is optimum with the
engine coolant at this temperature range
and high revving operation when the
engine is not warmed up enough should
be avoided.
1)
2)
U.S. spec. models
Except U.S. spec. models
The ECO gauge shows the difference
between the average rate of fuel consumption since the trip meter was last
reset and the current rate of fuel consumption.
The ECO gauge indicates the current fuel
. The ECO gauge shows only an
approximate indication.
. After resetting the trip meter, the
average rate of fuel consumption is not
shown until driving 0.6 mile (1 km).
Until that time, the ECO gauge does not
operate.