Conventional Cruise Control
● Automatic cancellation by the system
In the following cases, a buzzer sounds a single long beep and the Cruise control function is
automatically canceled (
is displayed on the EyeSight display area.). After the conditions listed below have been eliminated, perform the cruise control set operation again to
reactivate cruise control.
x The select lever was moved to a position other than D .
The cruise control function can be used again after the lever is returned to the D position.
x A paddle shift switch was operated during
driving with the lever in the D position.
The cruise control function can be used
again after the shift indicator returns to D .
x Vehicle speed drops to approximately 20
MPH (30 km/h) or less (due to a steep uphill
grade or some other reason).
S02330
x The X-mode is turned on (the X-mode indicator light
illuminates).
- Cruise control can be resumed after the X-mode is turned off.
x Vehicle speed rises to approximately 100 MPH (160 km/h) or more.
x The ABS, Vehicle Dynamics Control or Traction Control functions activate.
x Any door (except the rear gate/trunk) was opened.
x The driver’s seatbelt is unfastened.
x The Electronic Parking Brake is engaged (When the brake system warning light is illuminated or flashing).
x When the EyeSight system has a malfunction. (“
” (EyeSight Warning indicator:
Yellow) is turned on.)
x The steering wheel is turned significantly in either direction.
x The grade of the road is steep.
x The Pre-Collision secondary braking has activated.
WARNING
Do not use Conventional Cruise Control on slippery roads. Doing so may
result in an accident.
82