Subaru Outback Manuals 2017 Outback EyeSight® Driving Assist System | Page 42

Adaptive Cruise Control (2) Setting Adaptive Cruise Control Press the RES/SET switch to the “SET/-”. Adaptive Cruise Control is now set, and cruise control will start. If no vehicle in front has been detected, the vehicle drives at the constant set target speed. When Adaptive Cruise Control is set, the set speed and are displayed on the EyeSight display area. S01986 S02322 NOTE x The target vehicle speed can be set between 25 MPH (40 km/h) and 90 MPH (145 km/h). x If the vehicle speed is approximately 25 MPH (40 km/h) or less when the vehicle speed is set, the set vehicle speed is set to 25 MPH (40 km/h). x When driving on a curve, the vehicle may not accelerate, or may decelerate, even if the set speed is higher than the current vehicle speed. x If the EyeSight display portion (Adaptive Cruise Control indicator) on the multi information display does not illuminate, even when the (CRUISE) switch is pressed, the cruise control with Adaptive Cruise Control function will not operate. If this condition continues, the system is likely malfunctioning. Contact a SUBARU dealer to have the vehicle inspected. 39