Subaru Outback Manuals 2017 Outback EyeSight® Driving Assist System | Page 21

About EyeSight ■ (CRUISE) switch x Switches cruise control* on/off. x When this switch is pressed “ ” or “ ” appears on the EyeSight display area in the multi information display. This indicates that the main cruise control is turned on. Ÿ Refer to pages 38 and 76. x Can be used to cancel the cruise control. Ÿ Refer to pages 48 and 81. * Adaptive Cruise Control and Conventional Cruise Control ■ RES/SET switch ● SET/x Can be used to set cruise control*. x Can be used to reduce the set vehicle speed (when cruise control* is currently set). Ÿ Refer to pages 39 and 43 (for Adaptive Cruise Control). Ÿ Refer to pages 78 and 80 (for Conventional Cruise Control). ● RES/+ x After cruise control* is canceled, this switch can be used to resume the cruise control function at the vehicle speed that was previously set. x Can be used to increase set vehicle speed (when cruise control* is currently set). Ÿ Refer to pages 42 and 51 (for Adaptive Cruise Control). Ÿ Refer to pages 79 and 84 (for Conventional Cruise Control). * Adaptive Cruise Control and Conventional Cruise Control ■ / (Following distance setting) switch x Can be used to switch the set following distance in 4 stages: (only when Adaptive Cruise Control is on). Ÿ Refer to page 45. x When the (CRUISE) switch is on, press and hold this switch for approximately 2 seconds or longer to select Adaptive Cruise Control or Conventional Cruise Control. ■ (Lane Keep Assist) switch Switches Lane Keep Assist on/off. Ÿ Refer to page 58. 18