Subaru Outback Manuals 2016 Outback Owner's Manual | Page 183

Instruments and controls/Warning and indicator lights & Headlight indicator light This indicator light illuminates under the following conditions. . when the light switch is turned to the “ ” or “ ” position . when the light switch is in the “AUTO” position and the headlights illuminate automatically & Front fog light indicator light (if equipped) This indicator light illuminates while the front fog lights are illuminated. & X-mode indicator (if equipped) This indicator appears while the X-mode is activated. It will disappear when the X- mode is deactivated. & Hill descent control indicator (if equipped) This indicator appears while the hill descent control function is in standby. It will flash while the hill descent control function is operating. It will disappear when the hill descent control function is not available. & Steering responsive fog lights OFF indicator (models with EyeSight system) This indicator appears when the steering responsive fog lights system is deacti- vated. This indicator disappears when the system is activated. For details about the steering responsive fog lights system, refer to “Steering responsive fog lights system (models with EyeSight system)” F3-49. & BSD/RCTA warning in- dicator (if equipped) This warning indicator appears on the multi information display when the BSD (Blind Spot Detection) or RCTA (Rear Cross Traffic Alert) is not functioning for any reason. For further details, refer to “BSD/RCTA warning indicator” F7-58. If this indicator remains displayed, have your vehicle inspected by your SUBARU dealer as soon as possible. & BSD/RCTA OFF indica- tor (if equipped) This indicator appears on the multi in- formation display when the BSD/RCTA OFF switch is pressed to deactivate the 3-31 BSD (Blind Spot Detection) and RCTA (Rear Cross Traffic Alert). For details, refer to “BSD/RCTA OFF switch” F7-59. & Icy road surface warn- ing When the outside temperature is 378F (38C) or less, the icy road surface warning will illuminate to inform the driver that the road surface may be frozen. NOTE . The outside temperature indicator shows the temperature in the area around the sensor. Therefore, the tem- perature indication may differ from the actual outside air temperature. . The icy road surface warning screen should be treated only as a guide. Be sure to check the condition of the road surface before driving. . Once the icy road surface warning screen appears, it will not disappear unless the outside temperature has increased to 418F (58C) or higher.