BASIC INFORMATION BEFORE OPERATION
UNLOADING AN SD CARD
1. Turn the ignition switch to the“ OFF” position. 2. Open the SD card slot cover.
CAUTION
� When removing an SD card from the unit, pull it out horizontally. Do not pull it out upward or downward with force. Doing so may damage the SD card.
� Do not remove an SD card during playback. Doing so may corrupt the data. Please understand that no compensation will be given for corrupted data.
� Do not pull the SD card slot cover with force. By doing so, the SD card slot cover may come off, or be damaged. If the SD card slot cover comes off, it can be reattached by inserting the cover clip into the hole.
� Avoid touching the SD card terminals to prevent contamination. Doing so may cause card read failure.
3. Remove the SD card.
NOTE
� The system is reset and the initial screen appears if the map SD card is removed during use, however, this is not a malfunction. The map screen appears again approximately 7 seconds after reinserting the map SD card.
� Press in the SD card until you hear it“ click”, let go of the card, and then pull it straight out.
4. Close the SD card slot cover.
44