Bluetooth ® SETTINGS
4. ������������������������������������������������������ connection is complete.
NOTE
� If an error message is displayed, follow the guidance on the screen to try again.
� It may take time if the device connection is carried out during Bluetooth audio playback.
� Depending on the type of Bluetooth device being connected, it may be necessary to perform additional steps on the device.
AUTO CONNECTION MODE
CONNECTING MANUALLY
When the auto connection has failed or“ Bluetooth Power( Bluetooth Power)” is turned off, it is necessary to connect Bluetooth manually.
1. Select |
and |
then |
select |
SETTINGS |
( SETTINGS). |
|
|
|
|
2. Select Bluetooth( Bluetooth). |
3. Follow the steps in“ CONNECTING A Bluetooth |
������������������������������� |
To turn auto connection mode on, set“ Bluetooth Power ����������� �������� ��� ���� ��������� ������ ���� ���������� device in a location where the connection can be established.
� When the ignition switch is in the“ ACC” or“ ON” position, the system searches for a nearby registered device.
� The system will connect with the registered device that was last connected, if it is nearby.
RECONNECTING THE Bluetooth PHONE
If a Bluetooth phone is disconnected due to poor reception from the Bluetooth network when the ignition switch is turned to the“ ACC” or“ ON” position, the system automatically reconnect the Bluetooth phone.
� If a Bluetooth phone is disconnected on purpose, such as turning it off, this does not happen. Reconnect the Bluetooth phone manually.
SETTINGS
7
183