PHONE OPERATION( HANDS-FREE SYSTEM FOR CELLULAR PHONES)
SENDING TONES BY DIAL PAD
This operation cannot be performed while driving.
1. Select Dial Pad( Dial Pad).
NOTE
� A continuous tone signal is a character string that consists of numbers and the characters“ p” or“ w”.( e. g. 056133w0123p # 1�)
� When the“ p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have elapsed. When the“ w” pause tone is used, the tone data up until the next pause tone will be automatically sent after a user operation is performed.
� Release tones can be used when automated operation of a phone based service such as an answering machine or bank phone service is desired. A phone number with continuous tone signals can be registered in the contact list.
� Tone data after a“ w” pause tone can be operated on voice command during a call.
TRANSMIT VOLUME SETTING
2. Enter the desired number. BY SELECTING Release Tones( Release Tones)
1. Select Mic Volume( Mic Volume). 2. Select the desired level for the transmit volume.
Release Tones( Release Tones) appears when a continuous tone signal( s) containing a( w) is registered in the contact list.
This operation can be performed while driving.
1. Select Release Tones( Release Tones).
126