Conventional Cruise Control
●Automatic cancellation by the system In the following cases, a buzzer sounds a single long beep and the Cruise control function is automatically canceled( is displayed on the EyeSight display area.). After the conditions listed below have been eliminated, perform the cruise control set operation again to reactivate cruise control. � The select lever was moved to a position other than D. The cruise control function can be used again after the lever is returned to the D position.
� A paddle shift switch was operated during driving with the lever in the D position. The cruise control function can be used again after the shift indicator returns to D.
� Vehicle speed drops to approximately 20 MPH( 30 km / h) or less( due to a steep uphill grade or some other reason).
S01132
� The X-mode is turned on( the X-mode indicator light illuminates).- Cruise control can be resumed after the X-mode is turned off. � Vehicle speed rises to approximately 100 MPH( 160 km / h) or more. � The ABS, Vehicle Dynamics Control or Traction Control functions activate. � Any door( except the rear gate / trunk) was opened. � The driver’ s seatbelt is unfastened. � The Electronic Parking Brake is engaged( When the brake system warning light is illuminated or flashing). � When the EyeSight system has a malfunction.(“”( EyeSight Warning indicator:
Yellow) is turned on.) � The steering wheel is turned significantly in either direction. � The grade of the road is steep. � The Pre-Collision secondary braking has activated.
WARNING
Do not use Conventional Cruise Control on slippery roads. Doing so may result in an accident.
82