Adaptive Cruise Control
●Canceling the stay-stopped function If any of the following operations is performed, the stay-stopped function will be canceled and the Adaptive Cruise Control will be canceled at the same time. � The brake pedal is depressed. � The( CRUISE) switch is pressed. � The electronic parking brake switch is pressed to apply the Electronic Parking Brake.
WARNING
� While the stay-stopped function is engaged, do not exit the vehicle.
� The stay-stopped function is not a replacement for engaging the parking brake. When parking, always apply brakes manually to come to a full stop, then set the electronic parking brake.
CAUTION The stay-stopped function of cruise control will be canceled under the following conditions: � The vehicle is in stay-stopped mode for approximately 2 minutes or more.
( A buzzer will sound 5 intermittent beeps and 1 long beep.)
� Any condition in which automatic cancellation is met.( A buzzer sounds 1 long beep.)
� Refer to page 49. After the stay-stopped function has been canceled, the Electronic Parking Brake will be automatically applied and the brake system warning light will illuminate. However, if any canceling condition for the Electronic Parking Brake( i. e. the interlock system with the accelerator pedal, switch operation of the electronic parking brake, etc.) is fulfilled, the Electronic Parking Brake will not work.( For details, refer to the Owner’ s Manual for your vehicle.)
If the accelerator pedal is only slightly depressed while the stay-stopped function is activated, the stay-stopped function of cruise control may be canceled, and the Electronic Parking Brake may not work.
●Setting Adaptive Cruise Control while the Electronic Parking Brake is applied If the Electronic Parking Brake is applied, then before setting cruise control, release the Electronic Parking Brake by depressing the accelerator pedal or by other specified means. For details of how to release the electronic parking brake, refer to the Owner’ s Manual for your vehicle.
47