Subaru Outback Manuals 2016 Outback EyeSight® Driving Assist System | Page 22

About EyeSight
■( CRUISE) switch
� Switches cruise control * on / off.
� When this switch is pressed“” or“” appears on the EyeSight display area in the multi information display. This indicates that the main cruise control is turned on.
� Refer to pages 38 and 76. � Can be used to cancel the cruise control.
� Refer to pages 48 and 81. * Adaptive Cruise Control and Conventional Cruise Control
■ RES / SET switch
●SET /- � Can be used to set cruise control *. � Can be used to reduce the set vehicle speed( when cruise control * is currently set).
� Refer to pages 39 and 43( for Adaptive Cruise Control).
� Refer to pages 78 and 80( for Conventional Cruise Control).
●RES /+ � After cruise control * is canceled, this switch can be used to resume the cruise control function at the vehicle speed that was previously set.
� Can be used to increase set vehicle speed( when cruise control * is currently set).
� Refer to pages 42 and 51( for Adaptive Cruise Control).
� Refer to pages 79 and 84( for Conventional Cruise Control). * Adaptive Cruise Control and Conventional Cruise Control
■ /( Following distance setting) switch
� Can be used to switch the set following distance in 4 stages:( only when Adaptive Cruise Control is on).
� Refer to page 45. � When the( CRUISE) switch is on, press and hold this switch for approximately 2 seconds or longer to select Adaptive Cruise Control or Conventional Cruise Control.
■( Lane Keep Assist) switch
Switches Lane Keep Assist on / off.
� Refer to page 43.
18