Maintenance and service/Replacing battery
11-49
& Replacing battery of access
key
CAUTION
When removing or fitting the access
key cover, make sure that the plastic
part does not come off or become
misaligned.
Battery: Button battery CR2032
2. Wrap a flat-head screwdriver with vinyl
tape or a cloth, and insert it in the gap to
remove the cover.
1)
2)
4. Insert a new battery with its positive (+)
side facing upward as shown in the figure.
Release button
Mechanical key
1. Take out the mechanical key.
3. Take out the battery using a flat-head
screwdriver with vinyl tape or a cloth.
5. Attach the cover to the access key by
fitting the projections and recesses to-
gether.
CONTINUED