Subaru Outback Manuals 2015 Outback Owner's Manual | Page 390

Starting and operating/Continuously variable transmission & Select lever 7-25 ! P (Park) This position is for parking the vehicle and starting the engine. In this position, the transmission is mechanically locked to prevent the vehicle from rolling freely. When you park the vehicle, first apply the parking brake, then shift into the “P” position. Do not hold the vehicle with only the mechanical friction of the transmis- sion. 1) Select lever button : With the brake pedal depressed, shift while pressing the select lever button in : Shift while pressing the select lever button in : Shift without pressing the select lever button The select lever has four positions, “P”, “R”, “N”, “D” and also has a manual gate for using the manual mode. NOTE For some models, to protect the engine while the select lever is in the “P” or “N” position, the engine is controlled so that the engine speed may not become too high even if the accelerator pedal is depressed hard. To shift the select lever from the “P” to any other position, you should depress the brake pedal fully then move the select lever. This prevents the vehicle from lurching when it is started. ! R (Reverse) This position is for backing the vehicle. To shift from the “N” to “R” position, stop the vehicle completely then move the lever to the “R” position while pressing the select lever button in. When the ignition switch has been turned to the “LOCK”/“OFF” position, movement of the select lever from the “N” to “R” position is possible for a limited time period by depressing the brake pedal, and then it becomes impossible. For details, refer to “Shift lock function” F7-26. CONTINUED