Instruments and controls/Illumination brightness control
Illumination brightness con-
trol
NOTE
. When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the auto-
matic dimming function does not work
at all.
. The brightness setting is not can-
celed even when the ignition switch is
turned to the “LOCK”/“OFF” position.
3-47
Front fog light switch
(if equipped)
& Auto dimmer cancel function
The illumination brightness of the instru-
ment panel dims under the following
conditions.
. when the light switch is in the “
” or
“ ” position
. when the light switch is in the “AUTO”
position and the headlights illuminate
automatically
You can adjust the illumination brightness
for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
When the ambient light is bright, the
illumination brightness is set to the max-
imum regardless of the position of the
control dial. In this case, you cannot adjust
the illumination brightness by using the
control dial. When the ambient light is
dark, you can dim the illumination bright-
ness as described above.
The operational/non-operational setting
and sensitivity of the auto dimmer cancel
function can be changed by your
SUBARU dealer. Contact your SUBARU
dealer for details.
1)
2)
Headlight switch
Fog light switch
To turn on the front fog lights:
Turn the fog light switch to the “ ”
position while the headlights are in either
of the following conditions.
. while the headlight switch is in the “ ”
position with the low beam mode selected
. while the headlight switch is in the
“AUTO” position and the low beam head-
lights turn on automatically
To turn off the front fog lights:
Turn the fog light switch back down to the
“ ” position.
CONTINUED