Keys and doors/PIN Code Access (models with “keyless access with push button start system”)
& Registering a PIN code
PIN Code Access (models
with “keyless access with
push-button start system”)
! Preparation
1)
1)
Trunk opener button (Legacy)
2-21
Rear lock button (Outback)
While all doors (for Outback, including the
rear gate) are locked, you can unlock the
doors (including rear gate) without a key
by performing the following procedure.
. Legacy: press the trunk opener button
. Outback: press the rear lock button
NOTE
PIN Code Access will be helpful if the
key is accidentally left in the vehicle. It
is recommended that a 5-digit security
code (PIN code) is registered.
1. Close all doors (including trunk/rear
gate).
2. Press and hold the “ ” button on the
access key. Then all doors (including rear
gate) will be locked.
3. Keep the “ ” button pressed, and
press the following button within 5 sec-
onds after step 2.
. Legacy: the trunk opener button
. Outback: the rear lock button
4. Press and hold the above button for
more than 5 seconds. Then a chirp will
sound.
5. Press the “ ” button on the access key
while the chirp sounds.
Then the chirp will stop and the prepara-
tion is complete.
NOTE
If you do not press the “ ” button on
the access key, the chirp will sound for
30 seconds. In this case, the prepara-
tion for registering a PIN code does not
complete even if the chirp stops.
CONTINUED