Subaru Outback Manuals 2015 Outback EyeSight Driving Assist System Manual | Page 74

Conventional Cruise Control ■ Increasing the set vehicle speed The following two methods can be used to increase the set vehicle speed. ● Using the RES/SET switch Push the RES/SET switch in the following way while you are driving with Conventional Cruise Control on: Push the RES/+ switch towards the position (1) briefly: the set vehicle speed will increase in increments of 1 MPH (1 km/h) every time the button is pushed. Push the RES/+ switch towards the position (1) for longer: the set vehicle speed will increase in increments of 1 MPH (1 km/h) while the button is being pushed. Push the RES/+ switch towards the position (2) briefly: the set vehicle speed will increase in increments of 5 MPH (5 km/h) every time the button is pushed. Push the RES/+ switch towards the position (2) for longer: the set vehicle speed will increase in increments of 5 MPH (5 km/h) while the button is being pushed. The set vehicle speed is shown on the EyeSight display area. (2) (1) S01115 ● Using the accelerator pedal Operate the accelerator pedal to increase the vehicle speed. When the desired speed is reached, press the RES/SET switch to the “SET/-”. When the switch is released, the new vehicle speed is set. S01112 71